OneTouch III EMC Vista Update

OT3_EMC_Vista_Update.iso is an ISO image that, when burned to a CD using third-party software, will create an installation CD that can be used to install the Maxtor EasyManage and Retrospect Express HD 2.0 applications to your Windows Vista computer.

Release Notes

Note: This software is for the following OneTouch III Products:

  • OneTouch III Turbo Edition
  • OneTouch III FireWire 800


Make sure that the OneTouch III Turbo Edition/OneTouch III FireWire 800 drive is disconnected from your system prior to installing this software. You must have Administrator Permissions to install this software on your computer.


  • Step 1

    Download the OT3_EMC_Vista_Update.iso file from this page to your Windows Vista computer.

  • Step 2

    Using your third-party CD burning software, create the OT3_EMC_Vista_Update installation CD.

    Note: Refer to your CD burning software’s documentation for the procedure for burning an ISO image to a blank CD or see Document ID: 201431 for more information..

  • Step 3

    Once created, eject and reinsert the new installation CD into your CD/DVD ROM drive.

  • Step 4

    Windows Vista will prompt you with a User Account Control window for the DemoShield Multi – CD Launch (which details paths to the Launch.exe file). Click Continue.

  • Step 5

    After a few seconds, the Maxtor Select Language screen will open. Select your language (e.g., English) to proceed.

  • Step 6

    The main menu will appear next. Select Install Software.

  • Step 7

    The InstallShield welcome screen will open. Click Next.

  • Step 8

    The License Agreement screen will appear. After reading the License Agreement, click Yes.

  • Step 9

    The Choose Destination Location screen will appear. In the Destination Folder section of the screen, you can see where the Maxtor software will be installed. If you wish to change this, click Browse and choose a new location. When you are ready, click Next.

  • Step 10

    The Setup Status window will appear as EasyManage installs to your computer.

  • Step 11

    The InstallShield Wizard Complete window will appear. Click Finish. The Retrospect Express HD 2.0 InstallShield Wizard will appear automatically.

  • Step 12

    The Retrospect Express HD welcome screen will appear. Click Next.

  • Step 13

    The License Agreement screen will appear. After reading the agreement, select “I accept...” and click Next.

  • Step 14

    The Customer Information screen will appear. Enter your User Name (required), Organization (optional) and click Next.

  • Step 15

    The Setup Type screen will appear. Choose the Recommended option to install all of the Retrospect Software and click Next.

  • Step 16

    The Ready to Install screen appears. At this point, Retrospect Express HD 2.0 starts installing to your computer.

  • Step 17

    Retrospect Express HD will ask if you wish to configure Firewall changes. Click Allow to make the appropriate change to the firewall.

  • Step 18

    After the software is installed on your computer, the message “InstallShield Wizard Completed” will appear. Click Finish.

    Step 19

    A message appears asking you to restart. Follow the on-screen directions to restart your computer.