Download the .img file to your system and take note of the location where it was saved.
BlackArmor NAS 110 Firmware Update (Manual Download/Install)
The image file described here is the most current firmware update for the Seagate BlackArmor NAS 110 Servers. This image should only be applied if you have changed your firmware update settings to Manual.
Open your browser and launch the Seagate BlackArmor Web User Interface (UI). Provide administrative username/password authentication when prompted. The system Status page opens.
Supported Web Browsers (for Web Management Interface):
Windows: Microsoft Internet Explorer 6.0 or Newer, Firefox 2.xx or Newer
Macintosh: Safari 3.1 or Newer
NOTE: Though this is a simple procedure, it is recommended that you backup any/all critical data before continuing.
Click on the Firmware Update link provided in the left column of the Web UI. The Auto Update page opens.
Click on the Manual Update link provided in the left column of the Web UI. The Manual Update page opens.
Click Browse to locate/select the .img file. Once the file/file path is populated in the field provided, click the Submit button. The update will start automatically. This may take a few minutes to complete.
Note: During the update process, do not refresh or shut down your browser.
When finished the BlackArmor NAS 110 restarts. You will be returned to the Login Page where you can authenticate again to access the Web UI.
Macintosh OS X 10.4.11.x or higher
Windows 7 32 and 64-Bit
Windows Vista 32 and 64-Bit
- Macintosh OS X 10.4.11.x
- Windows 7 32 and 64-Bit
- Windows Vista 32 and 64-Bit
- Windows XP