End User License Agreement

Download File

File Version: 1.0
File Size: 317.0 kb
Supported Operating Systems: Windows 98

Overview:
The 3000LE Installation software provides the drivers needed for use with the Maxtor Personal Storage 3000LE in a Windows 98 Second Edition (SE) environment.

Instructions:

WARNING: Drivers found in the 3000le_style_b.exe file are ONLY for use on computer systems using Microsoft Windows 98SE (Second Edition). They are NOT to be loaded on any other operating system.

Software Drivers found in the 3000le_style_b.exe are SOLELY meant to be loaded on the following Style B 3000LE Models:

• VR120XXXXXXXX
• WF040XXXXXXXX

NOTE: The Model Number is located on the bottom of the 3000LE. The "X" characters identified in the aforementioned model numbers will be replaced by alphanumeric characters on your 3000LE unit. The same drivers found in the 3000le_style_b.exe are included on the Drivers CD that comes shipped with the 3000LE products.

If unsure of the Model Number, you can identify the affected models by where the power connector is located.  Or you can see Seagate Knowledge Base article 204211 for help in finding your drive's model number using Windows or MacOS.

WARNING: The driver(s) and procedure(s) in this document are NOT to be used with the following Style A units:

• USB2120XXXXXX
• USB2040XXXXXX

The "X" characters identified in the aforementioned model numbers will be replaced by alphanumeric characters on your 3000LE unit. Seagate requires that you download the Style A driver for these 3000LE products.

---

Installation Instructions

1. Download 3000le_style_b.exe from this web site.
    

2. Extract 3000le_style_b.exe to you computer that the 3000LE drive is connected to. Upon extraction, the 3000LE_Style_B directory will be created on your system. Suggestion: extract the 3000le_style_b.exe to the C: drive of the computer that you will connect the 3000LE External Storage Drive to (e.g. C:\3000LE_Style_B).
    

3. Shut down your computer and connect the Personal Storage 3000LE to an available USB interface on your computer. Once connected, apply power to the system.
    

4. After Windows 98SE starts, the Add New Hardware Wizard box will appear. Click the Next > button to continue.
    

5. On the next page, select "Search for the best driver for your device..." and click the Next > button to continue.
    

6. On the next page, check the "Specify a location:" checkbox and click on the Browse... button.
    

7. In the Browse for Folder Window, locate the 3000LE_Style_B directory (e.g., the suggested C:\3000LE_Style_B) and click the OK button.
    

8. Click on the Next > button to accept the selection of the driver MXOFX.INF.
   NOTE: The path identified in the image will vary depending on the location of the MXOFX.INF file. At this point the 3000LE software driver will load on your Windows 98SE computer.
    

9. To complete the installation, click on the Finish button and restart your Windows 98SE computer.