End User License Agreement

Download File

File Version: 1.0
File Size: 502.0 kb
Supported Operating Systems: Windows 98

Overview:
The onetouch_win98se_usb_driver.exe is a self-extracting file containing the USB Drivers needed for use with the Maxtor OneTouch drive in a Windows 98 Second Edition (SE) environment.

Instructions:

Installation Instructions

NOTE: Complete Installation Instructions with Windows98 Second Edition screen shots can be viewed and downloaded from this site.

• Download onetouch_win98se_usb_driver.exe from this web site.
• Extract onetouch_win98se_usb_driver.exe to you computer that the Maxtor OneTouch drive is connected to. Upon extraction, the OneTouch_USB directory will be created on your system. Suggestion: extract the onetouch_win98se_usb_driver.exe to the Desktop of the computer that you will connect the Maxtor OneTouch drive to.   
• Shut down your computer and connect the Maxtor OneTouch drive to an available USB interface on your computer. Once connected, apply power to the system.
• After Windows 98SE starts, the Add New Hardware Wizard box will appear. Click the Next > button to continue.
• On the next page, select "Search for the best driver for your device..." and click the Next > button to continue.
• On the next page, check the "Specify a location:" checkbox and click on the Browse... button.
• In the Browse for Folder Window, locate the OneTouch_USB directory and click the OK button.
• Click on the Next > button to accept the selection of the driver. NOTE: The path identified in the image will vary depending on the location of the file. At this point the Maxtor OneTouch software driver will load on your Windows 98SE computer.
• To complete the installation, click on the Finish button and restart your Windows 98SE computer.
• When finished, the Add New Hardware Wizard will appear for a second time. Repeat Steps 1-9 to install the Storage Adapter Bridge Module.