Was this content helpful?
How could we make this article more helpful?
Getting Started
Connect the USB cable
Use the included cable to connect One Touch SSD to a USB 3.0 port on your computer.
Set up Seagate One Touch SSD
The setup process lets you:
| Register One Touch SSD | Get the most from your drive with easy access to information and support. | www.seagate.com/register |
| Install Toolkit | Set up sync plans, archive settings, and more. |
www.seagate.com/toolkit |
Your computer must be connected to the internet to register your device and install Toolkit.
Start here
Using a file manager such as Finder or File Explorer, open One Touch SSD and launch Start Here Win or Start Here Mac.
Register your device
Enter your information and click Register.
Download Toolkit
Click the Download button.
Install Toolkit
Using a file manager such as Finder or File Explorer, go to the folder where you receive downloads.
Click on the SeagateToolkit.exe file to launch the application.
Open the SeagateToolkit.zip file. Click on the Seagate Toolkit Installer to launch the application.
Your computer must be connected to the internet to install and run Toolkit.