HOW TO USE THIS TOOL TO RECOVERY FAULTY BOOTCODE

Attention!!  The bootcode in first sector must exist, otherwise this
recovery tool is useless.

Recovery Procedure

1. Power off your DUT(Device Under Test)
2. Close all appplcations that communicates to COM1 port(hyperterm, SecureCRT, ...)
3. Connect your COM1 port to DUT
   !! You must use COM1, otherwise the tool can not run
4. Execute rec tool and specify your own 'register setting file'
   !! Example: 'rec nept.parallel.64x1'
5. Power on your DUT
   !! You must see a sequence of register-value pairs dumps in console, otherwise, 
   please return to step 1 again.
6. After tool runs done, please open hyper-terminal.  You will see 'C' dumping continuously.
   Please download your bootcode image using YModem-G.
7. After download bootcode image OK, the image will automatically update.  After you see
   a 'finished' string display, you can restart you DUT.  The Recovery procedure is done now.

   