Depending on the RAID level selected and size of hard drives, a RAID configuration can take from 24-40 hours to complete. When setting up a RAID level the green System Status LED should turn solid amber indicating the RAID is not configured and then turns solid green indicating RAID initialization is complete. In some cases, the RAID will be properly initialized but the System Status LED will blink green instead of turning solid green. If you believe that sufficient time has passed and the System Status LED is still blinking green rather than turning a solid green, check the status of the RAID configuration by logging into the storage system. Select the 'Disks' page and check the disk configuration. If it indicates the RAID configuration is normal RAID is initialized), reboot the system. On reboot, the System Status LED should blink green while booting and then go solid green, indicating normal operation.
Produk
Basis Pengetahuan
Dukungan Unduhan
Artikel
suggested searches
Log in
Seagate Partner Program Portal
Menyediakan akses ke pelatihan produk, penjualan, dan sumber daya pemasaran, pendaftaran kesepakatan, serta banyak lagi untuk VAR, Integrator, Penjual, dan mitra saluran lainnya.
Seagate Direct Customer Portal
Menyediakan alat B2B Layanan Pribadi untuk Pelanggan langsung seperti Penetapan Harga, Program, Pemesanan, Pengembalian, dan Penagihan.
Seagate Supplier Portal
Memberi Pemasok alat layanan mandiri yang ditargetkan untuk kebutuhan bisnis mereka.
