Formatting a Large Drive Greater Than 32GB with a FAT32 File System Using Seagate DiscWizard


Seagate DiscWizard allows drives larger than 32GB to be formatted with a FAT32 file system, this articles goes over the process. For best possible outcome, use a drive 2TB or smaller.

If using a drive larger than 2TB then be aware of the following:

  • The drive will need to be initalized GPT or only a single 2TB volume willl be available. The rest of the drive's capacity will not be accessible
  • Using GPT will require the drive to be split into two 2TB FAT32 partitions
  • If you are trying to use this on something like a TV, Blu-ray player, or other electronic device and it still does not work then the device may not support GPT. Check the manual for the device to confirm supported partition schemes (GPT/MBR) and files systems.

Reformatting the drive will erase all data on the drive, so you should copy any data you want off the drive prior to formatting.


Install and launch DiscWizard

1) From the DiscWizard home screen, select Tools then Add New Disk.

2) Select the correct disk and follow the wizard prompts.

User-added image


3) Select MBR or GPT if using larger than 2TB, see above

User-added image


4) Select the Unallocated disk and then Create new partition
 

User-added image


5) Change the File system: to FAT32.

User-added image
Note: If you prefer, you may manually select the partition letter and add a label.


6) Select Accept

7) Then select Next

8) Then select Proceed

A DiscWizard icon will be shown in the system tray indicating the formatting progress. Once complete, the drive will be accessible in Windows/File Explorer. 

 

  1. ⁺ For a limited time of March 25, 2024, 10:00AM Pacific Time ("PT") to April 1, 2024 9:59AM PT, all orders placed at the Seagate store at Seagate.com will receive free ground shipping to addresses located within the United States.