Introduction

LaCie^® Rugged^® SSD Pro features a Seagate^® FireCuda^® NVMe SSD, providing speeds of up to 2800MB/s¹ for file transfers and rendering.

For common questions and answers about your device, see Frequently Asked Questions or visit LaCie customer support.

Box content

• LaCie Rugged SSD Pro
• Thunderbolt^™ 3 (40Gb/s) cable

Minimum system requirements

Ports

Only connect LaCie Rugged SSD Pro to USB-C ports of the following type:

• Thunderbolt 3
• USB 3.1 Gen 1
• USB 3.1 Gen 2

Transfer rates vary (see Cables and Connectors).

Operating system

• Windows^® 10 or higher
• macOS^® 10.14 or higher

Minimum free disk space

• 600MB recommended 

Ingress Protection rating

The Ingress Protection (IP) rating is a standard for defining the types of protection supported by equipment and devices. The two-digit code for IP lets users know the conditions that the device can withstand. The two digits are independent, with each number representing a different level of protection.

Rugged SSD Pro is rated IP67.

6: Dust tight—No ingress of dust. Complete protection against contact (dust tight).
7: Immersion up to 1m— Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion).

Rugged SSD Pro has also been tested for the following:

• Drop resistance—Dropped from heights up to 3 meters (in non-operating mode).

¹ Data rates may vary depending on operating environment, interface, and capacity.