LCD Display

The Seagate 4-bay NAS features an LCD display on the front of the device to review its general settings. See the table below for the settings on the LCD display.

Menu	Sub-menu	Notes
Network	IP addresses	See the IP addresses assigned to the NAS.
Storage	Total and volume capacities	See the total capacity available to the NAS as well as the capacity for each volume.
Alerts	Hardware errors	Up to five alerts are listed on the sub-menu. Alerts include: temperature; casing; fan; and disks.
Temperature	Hardware temperatures	Check the temperature for the NAS's: CPU; motherboard; or drives.
Fan	Fan rotation	Check the rotational speed of the fan.
Date	Date, time and uptime	Uptime refers to the amount of time that the NAS has been powered on. It is listed in seconds.
Software version	Firmware	Check the firmware version for Seagate System Monitor.

Access the LCD display menu

Follow the steps below to access the Menus and Sub-menus listed above.

Apply a long push on the up or down arrow to enter the menu.
Push the up or down arrow to toggle through the menu selections. Each window reveals two selections.
Use the up/down arrow to highlight your selection.
Use a long push on one of the arrows to enter the sub-menu for that selection.
Push the up/down arrow to toggle through the sub-menu selections and apply a long push if applicable.
To exit a menu or sub-menu, apply a long push to the up or down arrow.

Each menu and sub-menu will remain on the LCD display for 30 seconds before reverting to the home screen.

Click here to access an up-to-date online versionof this document. You will also find the most recent content as well as expandable illustrations, easier navigation, and search capability.