SAVE AS PDF
Seagate Backup Plus Ultra Touch User Manual
Seagate Backup Plus Ultra Touch User Manual

Was this content helpful?

Getting Started

Connect the USB cable

Before connecting Backup Plus Ultra Touch, confirm the type of USB port on your computer.

PC/Mac with a USB-C port

If your computer has a USB-C port, use the Micro B to USB-A cable with the USB-C adapter for optimal transfer rates.

PC/Mac with a USB-A port

Use the Micro B to USB-A cable without the adapter if your computer does not have a USB-C port.

Set up Seagate Backup Plus Ultra Touch

The setup process lets you:

Register your Seagate Backup Plus Ultra Touch Get the most from your drive with easy access to information and support.
Install Toolkit

Set up and manage passwords, sync plans, archive settings, and more. 

  Your computer must be connected to the internet to register your device and install Toolkit.

Start here

Using a file manager such as Finder or File Explorer, open Backup Plus and launch Start Here Win or Start Here Mac.

Register your device

Enter your information and click Register.

Download Toolkit

Click the Download button.

Install Toolkit

Using a file manager such as Finder or File Explorer, go to the folder where you receive downloads.

Click on the SeagateToolkit.exe file to launch the application.

Open the SeagateToolkit.zip file. Click on the Seagate Toolkit Installer to launch the application.

 Your computer must be connected to the internet to install and run Toolkit.