SAVE AS PDF
One Touch HDD User Manual
One Touch HDD 

Was this content helpful?

Getting Started

Connect the USB cable

Use the Micro-B to USB-A cable to connect One Touch to a computer’s USB-A port.

 You can connect your Seagate device to a USB-C port on your computer. The USB-C port must support USB 3.0 or higher. A USB micro-B to USB-C cable is not included with this device.

Set up One Touch

The setup process lets you:

Register Seagate One Touch Get the most from your drive with easy access to information and support.
Install Toolkit

Set up backup plans and more.

  Your computer must be connected to the internet to register your device and install Toolkit.

Start here

Using a file manager such as Finder or File Explorer, open One Touch and launch Start Here Win or Start Here Mac.

Register your device

Enter your information and click Register.

Download Toolkit

Click the Download button.

Install Toolkit

Using a file manager such as Finder or File Explorer, go to the folder where you receive downloads.

Click on the SeagateToolkit.exe file to launch the application.

Open the SeagateToolkit.zip file. Click on the Seagate Toolkit Installer to launch the application.

 Your computer must be connected to the internet to install and update Toolkit.