Was this content helpful?
How could we make this article more helpful?
Seagate® Lyve™ Mobile Rackmount Receiver facilitates quick ingestion of shuttle content directly into a network center.
|Length||19 in/482.6 mm|
|Width||4.638 in/117.8 mm|
|Depth||24.598 in/624.78 mm|
|Mobile Rackmount Receiver||47.52 lb/21.6 kg|
Power adapter, AC/DC base in:100~240V/9.4A, out:12V/65A
|A||Slot A||Slot for compatible device.|
|B||Slot B||Slot for compatible device.|
|Power switch||Turn power on/off.|
|Power input - A
Power input - B
|Redundant power supply units. Each unit on its own is capable of delivering power to Lyve Mobile Rackmount Receiver and installed devices. See Power Connections.|
|2A||Slot A / Left||Data connection for device in slot A. See Data Connections.|
|3A||Slot A / Right||Host interface for future expansion. Not available with all models.|
|4A||Ethernet management port - A||Ethernet connection for device in slot A. Not to be used for data transfers.|
|5A||CLI management port - A||Command-line interface port for device in slot A. For service only. Not to be used for data transfers.|
|2B||Slot B / Left||Host interface for future expansion. Not available with all models.|
|3B||Slot B / Right||Data connection for device in slot B. See Data Connections.|
|4B||Ethernet management port - B||Ethernet connection for device in slot B. Not to be used for data transfers.|
|5B||CLI management port - B||Command-line interface port for device in slot B. For service only. Not to be used for data transfers.|