This article is for informational purposes only and no longer being updated by Seagate.

Error messages on the LCD screen (Biggest, F800, FW800 or S1S)

Condition 1 Note: not enough number of function disks for a RAID to operate Solution: Install all of 4 disks to conform to create a new RAID.
Condition 2 Note: Represents disk sequence is wrong, and the current sequence displayed within. Disk 2 and disk 1 sequence is reversed. The original disk 3 is put into tray 2 and the original disk 2 is not plugged or failed.
Condition 3 Note: The RAID has been failed but all of original disks are existing now. Solution: To create a new RAID.
Condition 4 Note: Battery is low, missing, or failed. Solution: Please contact with your distributor or vendor to change a new battery.
Condition 5 Note: Fan is low, missing, or failed. Solution: Please contact with your distributor or vendor to change a new Fan.