When upgrading to a larger capacity drive, the main thing to consider is whether or not your computer is capable of addressing the extra capacity provided by the larger drive. If the system is several years old this is especially true.
Here are some common thresholds for capacity limitations:
As an example, if you have an 80 GigaByte (GB) drive, and are considering upgrading to a 160 GB drive, it would be wise to verify that your system BIOS (Basic Input/Output System) is capable of addressing capacities above 137GB before purchasing one. If it is, you can safely use drives up to 2 Terabytes in capacity.
To check system BIOS compatibility, contact either the system vendor (HP, Gateway, Dell etc.) or the system mainboard manufacturer. Mainboard manufacturers usually have capacity limitations listed in the specifications on their website.
ATA Controller Cards
A workaround for a capacity issue with a Parallel ATA drive is to install an ATA controller card into a PCI slot in your system. Drivers will be provided by the card manufacturer to be loaded into Windows or MacOS. The larger capacity drive would be connected to the card instead of the mainboard so that the card can provide the addressing to the drive and enable larger capacities. A modern ATA-133 controller card would support up to 2TB in capacity per drive (usually up to 4 drives per controller card).
For Serial ATA (SATA) drives, all Serial ATA controllers are capable of up to 2TB in capacity so it is safe to assume that when you are upgrading a Serial ATA drive to a large capacity one, it will be compatible with your system.
You can also purchase a SATA-150 or SATA-300 controller to install into a free PCI slot that will enable compatibility with a Serial ATA drive for up to 2TB in capacity (usually up to 2 drives per controller card, commonly up to 4).
External and Networking Products
When upgrading to larger External and Network drive products, the extra capacity is handled by the operating system, so doesn't rely on BIOS addressing. It is safe to assume that if you are upgrading to a larger capacity External drive product, the same system would be able to handle the extra capacity if your older drive is already supported by the Operating System.
Here is a list of ATA and SATA controller vendors. Seagate does not support or endorse these vendors, but provides it as a convenience for our customers:
If you have questions about the system requirements in order to upgrade your drive, feel free to contact Seagate Support.
REFERENCE TO THIRD PARTIES AND THIRD PARTY WEB SITES. Seagate references third parties and third party products as an informational service only, it is not an endorsement or recommendation - implied or otherwise - of any of the listed companies. Seagate makes no warranty - implied or otherwise - regarding the performance or reliability of these companies or products. Each company listed is independent from Seagate and is not under the control of Seagate; therefore, Seagate accepts no responsibility for and disclaims any liability from the actions or products of the listed companies. You should make your own independent evaluation before conducting business with any company. To obtain product specifications and warranty information, please contact the respective vendor directly. There are links in this document that will permit you to connect to third-party web sites over which Seagate has no control. These links are provided for your convenience only and your use of them is at your own risk. Seagate makes no representations whatsoever about the content of any of these web sites. Seagate does not endorse or accept any responsibility for the content, or use, of any such web sites.