Terascale HDD

Knowledge Base

FAQ

• Seagate Policy Regarding Drives Installed In DVR Units
• Cabling - an overview
• Does my drive need a firmware update?
• What should I consider when selecting drives for use in a SCSI or SATA RAID configuration?
• Interactive Flash Guide for Disk Drives Beyond 2.2 TeraBytes (TB)
• Linux OS Support for Disk Drives Beyond 2.2 TeraBytes (TB)
• What is Electro-Static Discharge?
• What is the maximum altitude at which a Seagate hard drive will function?
• Intel Rapid Storage Technology (RST) drivers and Support for Disk Drives Beyond 2.2 TeraBytes (TB)
• Hard disk drive reliability and MTBF / AFR

How-To

• How to format a drive in Mac OS 10.6 to 10.10
• How To Install and Troubleshoot Serial ATA (SATA) Hard Drives
• How to configure the boot sequence in the system BIOS or CMOS.
• Mac OS X Installation Basics SATA Drive
• Where can I find Windows drivers for my SATA drive?
• Procedure for firmware update via bootable CD (Mac)
• How to Diskpart Erase/Clean a Drive Through the Command Prompt
• Connecting SATA drive to SAS controller
• 'No Firmware Found' for my drive
• Determining Internal Drive Details

Troubleshooting

• My internal drive is not displayed in My Computer or Windows Explorer
• Error Messages that Signify Drive Failure
• My system reported a S.M.A.R.T. error on the drive
• Internal Hard Drive Troubleshooter
• Common Stop (Blue Screen) Error Messages in Windows
• NTLDR is Missing' error message during Windows boot.
• Error Installing Windows 7 on Advanced Format Disk Drives
• The BIOS does not detect or recognize the ATA / SATA hard drive
• The drive is larger than 32GB, but the operating system only recognizes 32GB.
• Troubleshooting Master/Slave Problems with ATA hard drives