Instructions for using SeaTools Enterprise Edition to find the firmware version on a SCSI drive.
SCSI Hard Drives
- Download and install SeaTools Enterprise.
- Click START | PROGRAMS | SEATOOLS ENTERPRISE to run the program. It will SCAN any SCSI device(s) installed in the system.
- Select the drive you would like to update.
- If you double-click on the scanned model number it will provide you with your current Firmware Revision and Model Number. The Device Inquiry Box should also appear after double-clicking the scanned device.
The Drive's firmware version is very important. Applying the wrong firmware to a drive could possibly damage the drive.
You can also find the firmware revision on your drive label. You should write down the following information from the label:
Drive Model Number (example: ST3146807LC)
Drive Part Number (example: 9.xxxxxx-xxx)
Drive Firmware Rev. (example: xxxx)
For more information about firmware, please see Document ID: 207931.